Cut to Size Acrylic
Order rectangle or round acrylic panels in your choice of colour, thickness and size.
Choose your shape
Colour & thickness
Choose a result to confirm your new colour. Your previous colour is still selected.
Available thicknesses depend on the colour you choose.
Your first colour is selected above. You can add two more colours to the same sample pack.
Screen colours vary. Samples help you see the actual finish before ordering.
Enter your measurements
mmUse millimetres: 10cm = 100mm. Enter the finished size you need.
4Optional finishingHoles, rounded corners & polished edges
Corners
Enter every hole measurement. Measure from the selected panel edge to the centre of the hole, not its rim. H1, H2 and so on appear on your layout.
Choose a thickness to check availability.
Your unfinished panel is saved on this device.
Ordering information
Choose clear, coloured, matte, frosted, mirror, glitter or pearlescent acrylic. Available thicknesses and sheet sizes vary by finish.
Your layout and order summary show exactly what you have selected. Please check your finished dimensions and hole positions before adding to cart.
Need a shape or cutout this tool doesn’t offer? Contact us →How should I enter my size?
Use millimetres for your finished width and height, or diameter for a circle. For example, 60cm × 80cm is 600 × 800mm. The size limit shown depends on your chosen material and thickness.
Can I order several different panels?
Yes. Choose the quantity of identical panels, then add that configuration to cart. Choose “Add another size” to keep the colour and thickness for your next panel. You can review and edit configurations in your cart.
Can my order be delivered?
Pickup is always available. Eligible panels can receive delivery quotes in the cart. Panels over 1680mm wide or 1220mm high are pickup only. If your order includes a pickup-only item, the whole order is for pickup.
How do I specify holes and corners?
For rectangles, measure from the selected edges to each hole centre. For circles, choose Top, Right, Bottom, Left or Centre. Measure edge positions inward from the curved rim to the hole centre. Every hole needs at least 5mm of material between its outside edge and the panel edge, including rounded corners. The layout shows the active hole and its measurements. You can choose all rounded corners or individual corners, then enter a radius. Written instructions are available for more complex rectangular hole layouts. Contact us for other circle layouts.