Standard Shipping

Weld-On 16 Solvent Cement – 5oz

$22.00

Includes GST

Supplied in a 5oz tube.

Weld-On 16 is a very high-strength, clear, medium-bodied, fast-curing solvent-type acrylic cement. Suitable for cast, moulded or extruded acrylics, it forms initial bonds within minutes and strong joints within hours.

This item can only be shipped via Australia Regular Post or Road Express by courier due to the hazardous nature of the chemicals contained in this product.

Technical details

  • Colour: Clear
  • Viscosity: 800 CPS
  • Working time: 5–6 minutes
  • Fixture time: 10 minutes
  • 80% strength: 24 hours

Directions for use

  1. Parts to be joined should be clean and fit without forcing.
  2. Apply Weld-On 16 to one or both surfaces with a brush, polyethylene squeeze bottle or gun.
  3. If cement is applied to one surface, bring the two surfaces into gentle contact for several seconds to allow the dry surface to soften.
  4. Assemble with firm pressure while parts are still wet.
  5. Hold or clamp assembled parts firmly until the initial set. Joint strength increases greatly in 24 hours.
  6. Strength will continue to increase gradually for some weeks.

Shelf life

Two years in tightly sealed containers. Product stability depends on the container seal and solvent evaporation when open. Evaporation causes the cement to thicken and reduces its effectiveness.

Need a smaller tube? View the 1.5oz Weld-On 16 tube.

Weld-On 16 clear solvent cement for acrylic bonding, supplied in a 5oz tube. Review the technical details and delivery restrictions below.

Pickup is available from our Narre Warren workshop. Delivery is restricted to Australia Regular Post or Road Express courier; the delivery price is calculated at checkout.